Thing is seen in the diagram that he creates this sensor.

The diagram below transferred, he does see the changes of voltage that present themselves to the heads of the sensor when these comes gone through by a gravitational wave. When the diagram rises toward positive values, we locate of front to a collapse of matter; while when he descends is in presence of an outburst of matter. Reassuming: a collapse produces a positive wave while an outburst or an expansion of matter, it produces a negative wave.

 

Figure 1. They in this diagram could be seen at low resolution the gravitational waves he arrive to the sensor, till the 04-26-94 at 12-31-95. What it is a gravitational wave; and more precisely like I see in the diagram the developed of this wave. On the diagram do we see go up or go down the voltage to the heads of the sensor, does thing represent? The sensor is composed by a vacuum tube in which a filament utters electrons in invariable way in the time, that then comes accelerated by a voltage of 12 volt and they strike one screen of green phosphorus, this lights up with a value of light that depends I am by the quantity of current issued by the filament, that by the voltage of furnished acceleration (12 volt.) Now if I maintain constant I am the current issued by the filament that the voltage of acceleration, I should have a light constant to the exit of the vacuum tube; then if I place a photosensor photoresistor to the external of the vacuum tube I should not see any change. But he as is not, so much is real that also feeding the photoresistor with a voltage of only 10 volt, I find with changes of voltage in the arc of some months; among least value and the maximum value more of 4 volt, that is around the 40 per cent, you suffice look at the diagram. What does he happen to the inside of the vacuum tube? The current issued he by the filament is of approximately 4 milliampere with a better stability than 1 microampere; the voltage of acceleration is of approximately 12 volt with a better stability than 1 millivolt; all the apparatus, excepted the power supply, he has set in a thermostatic room to around 33 degrees celsius with a better stability than 1/100 of degree. The photoresistor is part of a branch of a bridge of Wheatstone which has fed to 20 volt. The branch of the fixed bridge is corporate by two resistances by 10 kohm to metallic layer to low thermic coefficient; the other side has constituted by the photoresistor and by a variable resistor that has the same value of resistance than the photoresistor. The varible resistor is of the kind to decimal clicks with you decay of resistances always to metallic layer. I must have used in the all time these precautions, because with the pass of the months, I perceived that the apparatus had of the oscillations in more or in minus according to that one he changed. I do a real example of the changes of voltage to the heads of the in operation bridge of that which happened. For a change of a degree of temperature to the system sensor, I have a change of voltage to the heads of the bridge of 40 millivolt. For a change of current issued by the filament of 1 microampere I have a change of 1 millivolt to the heads of the bridge. For a change of 1 millivolt in the voltage of acceleration of the electrons, I have a change of 0.26 millivolt to the heads of the bridge. All these precautions put in the construction of the apparatus, they will serve in succession to see when there will be of the small changes, what we will see, and they as will be important. But we return to the main problem. Because I tell that the forms of wave that are seen on the diagram represent gravitational waves you arrive to the instrumen; on that foundation sustains this. I premise that; for balance the bridge of Wheatstone to the arrival of a wave, the unique method for don't change the characteristics of the instrument is that of change the current issued by the filament, or that of change the value of the variable resistor in series with the photoresistor. The other system and that is that of change the voltage of acceleration of the electrons by little reliable results, because big changes of voltage would need that they then bring to derangement of the sensor for best or small caused heat. Of the two above mentioned, I have seen that surest and practical he is that of change the variable resistor, while the change of the current issued I of the filament use like calibrate of the complete sensor it. We return to the main problem. When in a part of the universe a collapse of matter happens or a burst, he comes produced a wave of a refaction or of compression of the space. This rarefaction or compression, that you then are propagated, you bring to one change of the dielectric and magnetic constant of the space. This occurrence brings like consequence to a change of the velocity of the light. Certainly that if a person searches of explain this phenomenon with the actual laws that they are founded on the constancy of the velocity of the light, he would fail to the first approach. If instead the existence of one space ether is admitted of gravitational particle formed, all returns to place with notable advantages, among which the explanation of phenomenons so called inexplicable, and as many other novelty to all today unknown. I am more of 30 years that I try of reveal this mysterious space ether particle with different techniques. I with the optic and electromagnetic techniques have always failed. With a magnetic apparatus built in the 1970 I have revealed it, I have measured for two years it, but I am not successful to understand it. And after so much past years to experiment different apparati, I have always failed. With this apparatus built in the December of the 1993, I have revealed immediately it as soon as I have lit it. Certainly I have not seen immediately the gravitational waves; even I didn't think absolutely I could not see they, I could not have imagined like they are made, I canned to the greatest suppose of their existence, but I would not have canned absolutely imagine that they would have caused when they were diffused in the space. I thought the space ether like to a wind that breezed from a direction of the cosmos well definite; for the fact that our solar system, together to the cluster of local galaxies stirs in a sure direction, but I in the months that followed was forced to change of much my precedents ideas. I saw this kind of wind arrive to blasts, that each two or three days changed direction, there was not more a point of definite reference: I in succession have understood for which reason. I in the meantime had built a magnetic sensor that was founded on the same principle of that which I had built in the 1970. Now too this produced results in accord with that to electrons. This magnetic sensor has set above a plate of a balance while he on the other plate comes placed a counterweight of plumb; I have used this metal after I have proven several. Also on this had installed a bridge of similar Wheatstone to that to electrons. The unique advantage that had this second sensor was that that: when the source of space ether in emission went to the horizon, the balance stopped almost totally his oscillations. I have gone along for three months with these two apparati doing the measures numerous times during the arc of the day. Toward the end of March of the 94, he began to happen me a unusually occurrence: while I did the measurements with the instrument to electrons, that consists of five measurements and five recalibrations, after of that I did her average for obtain a more accurate value, I hastened me that the data that I extracted, if seen on a supposed diagram, they went for some day in gone up and some day in gone down. But I didn't worry too because I as reset the bridge with a variable resistor, and I then went forward. In succession the variable resistor was not more sufficient to reset the bridge, therefore I began to add resistances to a side of the bridge, I to the moment thought to an exhaustion of the vacuum tube and I continued to add resistances for compensate the all. I checked more and more times the powersupply, but he had not stirred nothing, I had in the meantime added to a side of the bridge a value of resistances of the 50 per cent of the value of the branch. In synthesis to the initial value of the 10 original kohm, I had added some other for a value of 5 kohm. That was really as much. Suddenly this big skidding stayed and he immediately began to skid in the opposite direction, then day after day I put it back all the added resistances and i put it again on the other resistance of the branch. He at this point came me a big doubt; I left in a fixed point and on the floor the sensor, without more move it, and I began to register all the changes of voltage that this received. He was the end of April of the 1994. I think that if there have not been these big changes, I would not be me aware of anything.

figure 1.available by file from test01
figure 2.available by file from test02
figure 3.available by file from test03
figure 4.available by file from test04
figure 5.available by file from test05
figure 6.available by file from test06
figure 7.available by file from test07
figure 8.available by file from test08
figure 9.available by file from test09
figure 10.available by file from test10
figure 11.available by file from test11
figure 12.available by file from test12
figure 13.available by file from test13
figure 14.available by file from test14
figure 15.available by file from test15
figure 16.available by file from test16
figure 17.available by file from test17
figure 18.available by file from test18
figure 18b. Discussion file from test18b
figure 19.available by file from test19
figure 0.available by file from Homepage